Minimum Cord Size; Extension Cords; Grounding - Grizzly G4815 Instruction Manual

Minimum Cord Size

For 220V single-phase operation, use the follow-
ing power cord:
G9953Z/G9953ZX—220V, Single-Phase
Cord ..............................................2 Pole, 3 Wire
Gauge ..............................................................10
For 220V 3-phase operation, use the following
power cord:
G9953ZXF—220V, 3-Phase
Cord ..............................................3 Pole, 4 Wire
Gauge ..............................................................10
G4815—220V, 3-Phase
Cord ..............................................3 Pole, 4 Wire
Gauge ..............................................................10

Grounding

Electrocution or a fire
can result if the machine
is not grounded correct-
ly. Make sure all electri-
cal circuits are ground-
ed. DO NOT use the
machine if it is not
grounded.
In the event of an electrical short, grounding
reduces the risk of electric shock by providing a
path of least resistance to disperse electric cur-
rent. This machine is equipped with a power cord
that has an equipment-grounding prong. The out-
let must be properly installed and grounded in
accordance with all local codes and ordinances.
Ultimate Series Jointers

Extension Cords

We do not recommend the use of extension
cords with 220V single or 3-phase equipment.
Instead, arrange the placement of your equip-
ment and the installed wiring to eliminate the
need for extension cords.
No single list of electrical guidelines can
be comprehensive for all shop environ-
ments. Operating this machinery may
require additional electrical upgrades spe-
cific to your machine and shop environ-
ment. It is your responsibility to make sure
your electrical systems comply with all
local electrical codes and ordinances.
-9-