Grizzly G4176 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Power Tool
  5. Power Feeder G4176
  6. Owner's manual

Grizzly G4176 Owner's Manual

1/4 hp power feeder
Hide thumbs Also See for G4176:
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL G4176
⁄
HP POWER FEEDER
1
4
OWNER'S MaNuaL
(For models manufactured since 8/97)
Copyright © JUNE, 2008 By grizzly iNdUstrial, iNC. rEVisEd oCtoBEr, 2013 (st)
WaRNiNG: NO PORtiON OF tHiS MaNuaL May bE REPRODucED iN aNy SHaPE
OR FORM WitHOut tHE WRittEN aPPROvaL OF GRizzLy iNDuStRiaL, iNc.
#Cr10815 priNtEd iN taiWaN

Advertisement

Table of Contents
loading

Related Manuals for Grizzly G4176

Summary of Contents for Grizzly G4176

  • Page 1 OWNER'S MaNuaL (For models manufactured since 8/97) Copyright © JUNE, 2008 By grizzly iNdUstrial, iNC. rEVisEd oCtoBEr, 2013 (st) WaRNiNG: NO PORtiON OF tHiS MaNuaL May bE REPRODucED iN aNy SHaPE OR FORM WitHOut tHE WRittEN aPPROvaL OF GRizzLy iNDuStRiaL, iNc.
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    ........................23 Wheel replacement ......................... 24 SEctiON 8: WiRiNG ........................25 Wiring safety instructions ......................25 Wiring diagram......................... 26 SEctiON 9: PaRtS ........................27 Main Breakdown........................27 Base Breakdown ........................29 WaRRaNty & REtuRNS ......................32 Model G4176 (Mfg. Since 8/97)

  • Page 4: Introduction

    Before calling, please write down the Manufacture Date and Serial Number stamped into the machine id label (see below). this infor- mation helps us determine if updated documenta- tion is available for your machine. Manufacture date serial Number Model G4176 (Mfg. Since 8/97)

  • Page 5: Machine Data Sheet

    MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G4176 1/4 HP POWER FEEDER Product Dimensions: Weight................................73 lbs. Width (side-to-side) x Depth (front-to-back) x Height................34 x 13 x 24 in.
  • Page 6 The information contained herein is deemed accurate as of 9/13/2012 and represents our most recent product specifications. Model G4176 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G4176 (Mfg. Since 8/97)

  • Page 7: Components & Terminology

    Behind Elbow Joint Vertical travel lock lever rotary Movement lock lever Elbow Joint lock lever Figure 1. Controls and features. to reduce your risk of serious injury, read this entire manual bEFORE using machine. Model G4176 (Mfg. Since 8/97)

  • Page 8: Section 1: Safety

    Everyday ery. Never operate under the influence of drugs or eyeglasses are Not approved safety glasses. alcohol, when tired, or when distracted. Model G4176 (Mfg. Since 8/97)
  • Page 9 Contact our debris. Make sure they are properly installed, technical support at (570) 546-9663. undamaged, and working correctly. Model G4176 (Mfg. Since 8/97)

  • Page 10: Additional Safety For Power Feeders

    Failure to do so could result in serious per- operator injury. if normal safety precautions sonal injury, damage to equipment, or poor are overlooked or ignored, serious personal injury may occur. work results. Model G4176 (Mfg. Since 8/97)

  • Page 11: Section 2: Power Supply

    Model G4176 (Mfg. Since 8/97)

  • Page 12: Extension Cords

    Two-prong outlets do not meet the grounding requirements for this machine. Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. -10- Model G4176 (Mfg. Since 8/97)

  • Page 13: Section 3: Setup

    When you are completely satisfied with the condi- tion of your shipment, inventory the contents. SUFFOCATION HAZARD! Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately. -11- Model G4176 (Mfg. Since 8/97)

  • Page 14: Inventory

    If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory. -12- Model G4176 (Mfg. Since 8/97)

  • Page 15: Cleanup

    Repeat Steps 2–3 as necessary until clean, Figure 5. t23692 orange power degreaser. then coat all unpainted surfaces with a quality metal protectant to prevent rust. -13- Model G4176 (Mfg. Since 8/97)

  • Page 16: Assembly

    Figure 7. assembled unit. -14- Model G4176 (Mfg. Since 8/97)

  • Page 17: Base Mounting

    " lower than the thickness of your workpiece. Shaper Jointer Table Saw Fence Fence Fence Blade Optional Cutter Featherboard 4th-Roller Feed Models Feed Feed Cutterhead Figure 8. typical power feed mounting on a shaper, jointer, and table saw. -15- Model G4176 (Mfg. Since 8/97)

  • Page 18: Mounting Options

    Mounting option. in any case, make sure to use a medium- grade liquid thread locking compound on all threads. -16- Model G4176 (Mfg. Since 8/97)

  • Page 19: Test Run

    Ensure that all tools and objects used during set up are cleared away from the machine. adjust and lock the power feeder so the wheels are held approximately one inch above the table and nothing will interfere with wheel rotation. -17- Model G4176 (Mfg. Since 8/97)

  • Page 20: Section 4: Operations

    Regardless of the content in this sec- stock. tion, Grizzly industrial will not be held liable for accidents caused by lack of training. Next, adjust the power feeder so the rubber wheels are parallel with the table surface, and are ⁄...
  • Page 21 (see Figure 12) or the table (see Figure 13) to find the gear combination required for your chosen feed rate. Change gear position a Change gear position B Change gear Chart Figure 12. Change gear locations. -19- Model G4176 (Mfg. Since 8/97)

  • Page 22: Section 5: Maintenance

    Lubrication • to prevent surface rust and binding, peri- odically clean and oil all lock lever and lead Figure 15. sprockets, chain, screw threads with a light machine oil. and change gears. -20- Model G4176 (Mfg. Since 8/97)

  • Page 23: Section 6: Accessories

    SEctiON 6: accESSORiES G4177—Synthetic Rubber Roller for G4176 ⁄ " wide x 3 ⁄ " diameter rubber rollers are made from synthetic rubber. installing unapproved accessories may cause machine to malfunction, resulting in serious personal injury or machine damage.
  • Page 24 Figure 22. h1412 Cutting & tapping Fluid. Figure 24. half-mask respirator with disposable cartridge filters. www.grizzly.com 1-800-523-4777 order online at or call -22- Model G4176 (Mfg. Since 8/97)

  • Page 25: Section 7: Service

    2. sharpen or replace knives. ⁄ 1. power feeder roller height is set incorrectly. 1. lower the power feeder roller " lower than the Workpiece hangs and does not enter height of the workpiece. the machine. -23- Model G4176 (Mfg. Since 8/97)

  • Page 26: Wheel Replacement

    Wrench 5mm ........1 screw Figure 25. Wheel replacement. swap the old wheel with the new. reinstall the two cap screws, and tighten in an alternating pattern until the wheel is sec- cure. -24- Model G4176 (Mfg. Since 8/97)

  • Page 27: Section 8: Wiring

    Technical source. Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -25- Model G4176 (Mfg. Since 8/97)

  • Page 28: Wiring Diagram

    Ground Start Capacitor View this page in color at www.grizzly.com. Ground Neutral 120 VAC 5-15 Plug Ground Figure 26. Motor capacitor. Figure 27. Motor power and direction switch. -26- READ ELECTRICAL SAFETY Model G4176 (Mfg. Since 8/97) ON PAGE 25...

  • Page 29: Section 9: Parts

    SEctiON 9: PaRtS Main breakdown -27- Model G4176 (Mfg. Since 8/97)
  • Page 30 Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.

  • Page 31: Base Breakdown

    690-1 P4176690-1 BASE P4176731 SWIVEL CONE ASSEMBLY 690-2 P4176690-2 FLAT WASHER 8MM 731-1 P4176731-1 SWIVEL CONE 690-3 P4176690-3 LEVER M8-1.25 731-2 P4176731-2 HEX NUT M16-2 690-4 P4176690-4 HEX NUT M8-1.25 731-3 P4176731-3 LEVER M16-2 -29- Model G4176 (Mfg. Since 8/97)
  • Page 32 Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
  • Page 33 FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...

  • Page 34: Warranty & Returns

    WaRRaNty & REtuRNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

Table of Contents