Call Forwarding; Send All Calls (Do Not Disturb) - Avaya 4400 User Manual

4400 and 6400 Series User Guide

Call Forwarding

You can forward your calls to another extension. While forwarding your calls, your phone will display a D
in the top-right of the display. If the station that you are forwarding calls to also has forwarding active,
your calls will go to the final destination.
To set call forwarding:
•
Press the programmed CFrwd DSS key.
Alternatively:
1. Press Menu.
2. Press and Next/Prev to search and then press CFrwd.
3. Set the required divert number. To backspace, pres the left-hand display key. When you have
activated Divert, the forward number is automatically filled in with the Divert number. Press
Done.
4. Press Exit.
To clear call forwarding:
• Press the programmed CFrwd DSS key.
Alternatively:
1. Press Menu.
2. To search, press and Next/Prev and then press CFrwd.
3. Press Exit.

Send All Calls (Do Not Disturb)

When on, all your callers either hear a busy tone or are diverted to voicemail if installed. The system
administrator can setup a list of exception numbers for you who can still call you during Do Not Disturb.
4406D+ users can activate this feature via a short code or programmed button.
TransTalk MDW 9040 users activate this via a short code.
To switch send all calls on/off:
• Press the programmed SAC DSS key.
Alternatively:
1. Press Menu.
2. Press and Next/Prev to search and then press SAC. A V above it indicates it is on.
3. Press Exit.
4400 and 6400 Series User Guide
IP Office 3.2 15-601074 Issue 11a (30th June 2006)
Page 18