Chapter 9: Install Ups And Apply Power - Avaya G700 Quick Start Installation Manual

Chapter 9: Install UPS and Apply Power

UPS (AC only)
1. The UPS is an option for AC-powered
gateways only. From the back of the
G700 Media Gateway, connect the
Uninterruptable Power Supply (UPS)
using the manufacturer's instructions.
Note:
A stand-alone version of the
Note:
UPS is shown.
AC power
1. Apply power to each media gateway
by connecting the AC power cord.
Note:
There is no on/off switch.
Note:
The units will power up
when connected.
Issue 8 February 2007 25