Chapter 8: Install Usb Modem And Cd-Rom Drive - Avaya G700 Quick Start Installation Manual

Chapter 8: Install USB Modem and CD-ROM Drive

E X
T
1
USB Modem
1. Connect the USB cable to one of the
2. Following the instructions packaged with
3. Connect the analog telephone line to the
USB CD-ROM/DVD Drive
The USB CD-ROM or DVD/CD-RW drive is
used primarily as a software source location
when remastering an S8300 hard drive.
1. Connect the USB cable into one of the
2. Connect the other end of the USB cable
3. If you are using an Addonics DVD/
Note:
4. If you are using an Addonics DVD drive,
5. If you are using an S8300/S8400 DVD/
h1dcadvd LAO 103006
USB ports on the faceplate of the S8300.
the modem, connect the other end of the
USB cable to the modem.
RJ-11 jack on the modem.
USB ports on the faceplate of the S8300.
to the CD-ROM or DVD/CD-RW drive.
CD-RW drive, connect the power cord to
the drive and an electrical outlet.
Note:
The TEAC drive and S8300/
S8400 drive get their power
from the server over the USB
connection.
set the power source switch on the side
to EXT, not USB. See item 1 in the figure
to the left.
CD-RW drive, set the on/off switch to
On.
Be sure to set the S8300/S8400 drive to
Off when not in use.
Issue 8 February 2007 23