Using The Control Panel - Pentax K-50 Operating Manual

Using the Control Panel

In standby mode, you can switch to the control panel and change settings.
Below, how to set [JPEG Quality] is explained as an example.
1
Press the M button in
standby mode.
The control panel appears.
2
Use the four-way controller
(2345) to select the item you
want to change the setting for.
You cannot select items that cannot be
changed as a result of current camera
settings.
3
Press the 4 button.
The setup screen of the selected item
appears.
4
Use the four-way controller (45)
or rear e-dial (S) to select a
setting value.
Items not available with the current
camera settings cannot be selected.
Custom Image Custom Image
Bright Bright
JPEG Quality JPEG Quality
JPEG Quality JPEG Quality
Cancel Cancel
MENU
39
1
128 128
128 128
128 128
OK OK
OK