Pentax K-50 Operating Manual page 197

4
To check the parameter details,
press the M button.
You can check the filter parameters.
Press the 3 button to return to the
previous screen.
5
Press the 4 button.
The image selection screen appears.
6
Turn the front e-dial (R) to
select the image to apply the
same filter effects, and press the
4 button.
You can only select the image that has
not been processed with a filter.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The filter-processed image is saved as a new image.
If [Searching for the original image] is selected in Step 3, the original image
prior to digital filter application can be retrieved. If the original image is no
longer stored on the SD Memory Card, the message [Original image, prior to
digital filter application, is not found] appears.
Reapplies following digital filter Reapplies following digital filter
effects from previous image effects from previous image
1. 1. 5. 5. 9. 9. 13. 13.
2. 2. 6. 6. 10. 10. 14. 14.
3. 3. 7. 7. 11. 11. 15. 15.
4. 4. 8. 8. 12. 12. 16. 16.
Details Details
MENU MENU INFO
100-0001 100-0001
Performs digital filter Performs digital filter
processing to this image processing to this image
MENU
195
100-0001 100-0001
17. 17.
18. 18.
19. 19.
20. 20.
OK OK
OK
6
OK OK
OK