Pentax K-50 Operating Manual page 281

Diopter Adjustment Approx. -2.5 to +1.5 m
Focusing Screen Interchangeable Natural-Bright-Matte III focusing screen
Live View
Type TTL method using CMOS image sensor
Focusing
Contrast detection: Face Detection, Tracking, Select, Spot
Mechanism
Field of view: approx. 100%, Magnified view (2×, 4×, 6×), Grid
Display Display (4 × 4 Grid, Golden Section, Scale), Bright/Dark Area
warning, Histogram, Focus Peaking
LCD Monitor
Type TFT color LCD monitor, wide angle viewing
Size 3.0 inches
Dots Approx. 921,000 dots
Adjustment Brightness and colors adjustable
White Balance
Method using a combination of the CMOS sensor and the light-
Auto
source detection sensor
Daylight, Shade, Cloudy, Fluorescent Light (D: Daylight Color, N:
Preset Modes Daylight White, W: Cool White, L: Warm White), Tungsten, Flash,
f, Manual, Color Temperature
Configuration on monitor (up to 3 settings can be saved),
Manual Color Temperature settings,
Copying the white balance settings of a captured image
Fine Adjustment Adjustable ±7 steps on A-B axis and G-M axis
Focusing System
Type TTL: phase-matching autofocus
Focus Sensor SAFOX IXi+, 11 points (9 cross type focus points in the center)
Brightness Range EV -1 to 18 (ISO 100)
AF Single (l): Focus priority or shutter priority mode
AF Modes AF Continuous (k): Focus priority or FPS priority mode
AF Auto (f): Automatically switches between l and k.
Focus Point Auto (5 AF Points), Auto (11 AF Points), Select (Expanded Area AF
Selection Modes is available), Spot
AF Assist Light Dedicated LED AF assist light
-1
279
10