Pentax K-50 Operating Manual page 164

162
1
Press the M button in standby mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Digital
Filter], and press the 4 button.
The Digital Filter setting screen appears.
The last image taken is displayed in the background.
3
Use the four-way controller
(2345) to select a filter.
You can check the selected filter effect
with the background image.
Proceed to Step 7 if you do not need to
change the parameters.
5
Available operations
M button
m button
V/Y button Uses Digital Preview to preview the background image
4
Press the M button.
The screen to adjust the parameters appears.
5
Use the four-way controller (23)
to select a parameter, and use
the four-way controller (45) to
adjust the value.
Press the d button to reset the
adjustment value to the default setting.
6
Press the 4 button.
The screen that was displayed in Step 3 appears again.
Displays the screen to adjust the parameters.
Saves the background image (only when the data is
available).
with the filter effect applied (only when shooting with the
viewfinder).
Toy Camera Toy Camera
Parameter Adj. Parameter Adj.
INFO
Cancel Cancel Check Check
MENU
Shading Level Shading Level
Cancel Cancel Check Check
MENU
OK OK
OK
OK OK
OK