Pentax K-50 Operating Manual page 133

5
Select [Recorded Pixels].
Recorded Pixels
a (default setting)
b
c
When the setting is changed, the amount of recordable time for that
setting appears at the top right of the screen.
6
Select [Framerate].
The frame rates that can be selected vary depending on the recorded pixels.
7
Set [Quality Level] to [C], [D], or [E].
8
Press the 3 button.
The [C Movie 1] menu appears.
9
Use the four-way controller (23) to select [Recording
Sound Level], and use the four-way controller (45) to
select the recording sound level.
Set in the range from 0 to 5.
Sound is not recorded when l (0) is selected.
10
Use the four-way controller (23) to select [Movie SR],
and press the four-way controller (5).
11
Use the four-way controller (23) to select Q or R, and
press the 4 button.
Uses Movie Shake Reduction. (default setting)
Q
Does not use Movie Shake Reduction.
R
12
Press the 3 button.
The camera is ready to record a movie.
The settings described in this section can also be set through the control panel.
Display
Aspect Ratio
Resolution
1920×1080
1280×720
640×480
Frame Rate (fps)
30/25/24
K
60/50/30/25/24
K
30/25/24
I
131
4