Pentax K-50 Operating Manual page 275

Error Messages
Not enough battery
power remaining to
activate Pixel Mapping
Not enough battery
power remaining to
clean sensor
Not enough battery
power remaining to
update the firmware
Unable to update firmware.
There is a problem with the
firmware update file
Image folder cannot be
created
Unable to store image
Settings not stored
The operation could not be
completed correctly
No more images
can be selected
Image not found
No image can be processed
This image cannot be
processed
The camera failed
to create an image
Description
Appears during Pixel Mapping if the battery level
is insufficient. Install a fully charged battery or
use the optional AC adapter kit.
Appears during sensor cleaning if the battery
level is insufficient. Install a fully charged battery
or use the optional AC adapter kit.
Appears when trying to update the firmware if the
battery level is insufficient. Install a fully charged
battery or use the optional AC adapter kit.
Unable to update the firmware. The update file is
damaged. Try downloading the update file again.
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.221)
The image could not be saved because of an SD
Memory Card error.
The DPOF settings could not be saved because
the SD Memory Card is full. Delete unwanted
images and perform the DPOF setting again.
(p.186)
The camera was unable to measure the manual
white balance (p.147) or use HDR Capture
(p.151). Try the operation again.
You cannot select more than the maximum
number of images for Select & Delete (p.186),
Index (p.196), and Eye-Fi Image Transfer
(p.229).
There are no images that can be transferred in
the selected folder. (p.229)
There are no images that can be processed
using the Digital Filter (p.191) or RAW
Development (p.198) function.
Appears when you try to perform Resize (p.189),
Cropping (p.190), Digital Filter (p.191), or RAW
Development (p.198) for images captured with
other cameras, or when you try to perform Resize
or Cropping for minimum file size images.
The creation of an index image failed. (p.196)
273
10