Installing The Device; Mounting The Device On Your Bike; Installing The Sensors On Your Bike - Mio Cyclo 100 Series User Manual

Installing the device

Follow the instructions in this section to mount the device and the cadence/
speed sensor kit (for selected models only) on your bike. In addition, you will
need to put on the heart rate monitor during your workouts.

Mounting the device on your bike

The bike mount kit includes two types of rubber pads, allowing you to attach
the bike mount to your bike securely.
1. Select the rubber pad that best fits the handle bars on your bike and then
attach it using the two plastic straps.
1
1 1
1
b
2 2
2
2. Align the latch on the back of the device with the slot on the bike mount,
and then rotate the device clockwise to lock the device to the bike mount.
b
2
1 2
2
a a
a
b b
3
3 3
a
3
a
b
3. For certain applications, you can change the screen orientation by rotating
3
the device from portrait to the landscape mode, and vise versa.
a
b
4. To remove the device from the bike mount, rotate it anticlockwise.

Installing the sensors on your bike

3
The cadence/speed sensor kit is used for selected models only.
1. Follow the instruction below to install the cadence/speed sensor kit on your
bike.
6
1
2
c
a
d
b
3