Auto Lap; Auto Pause; Barometer; Compass - Mio Cyclo 100 Series User Manual

AUTO LAP

In the TRIGGER field, select DISTANCE or BY TIME
to set the device to record the laps automatically
according to the trigger setting.
Otherwise, select OFF to disable the function.

AUTO PAUSE

This function allows you to pause the timer
automatically when you stop moving (WHEN
STOPPED) or your speed falls below a certain value
(CUSTOM SPEED).
Tip: During the training/workout, the data will not be
recorded when stationary or when within a specific speed
so that the average speed and calorie calculation is more
accurate.

BAROMETER

In order to gain an accurate altitude reading, you
are recommended to calibrate the barometer
before starting your training/workout.
You can calibrate the barometer manually or
automatically by selecting:
• AUTO: (default) The system will calibrate
the sensor upon GPS signal when the signal is
reliable. It always calibrates once after power on.
• MANUAL: You can manually input the required
data in the S.L. PRESSURE field (your local Sea
Level Pressure) from the official weather bureau.
The system will display the current altitude
according to the setting value.

COMPASS

The built-in electronic compass can assist with
GPS and improves accuracy when stationary. The
compass will need to be calibrated before use.
Follow these instructions to calibrate the compass:
Note: While using the built-in electronic compass, place
the device away from any objects that generate magnetic
fields such as electrical appliances, magnets or high-
voltage towers. This might cause your device to point in
the wrong direction.
• CALIBRATION: You have to calibrate before
• DECLINATION: The Earth's magnetic field
• FOLLOW BEARING: The bearing angle means
14
using the electronics compass. Follow the on
screen instruction to complete calibration.
is not exactly symmetrical, which means the
magnetic pole is not aligned with its axis. You
can manually input the declination value or
set it to auto calibration. We recommend auto
calibration.
Otherwise, select OFF to disable the function.
the angle between the top point of the screen
and the target point. The Compass can be used
without GPS to reduce power consumption.