Connecting Your Device To The Computer; Installing The Device; Mounting The Device On Your Bike - Mio Cyclo 400 series User Manual

Enter the Startup Key (which is printed on the bottom of the box) and
then tap OK to unlock your device. You will only have to do this the
first time you use the device.
5. Once your device is turned on, it will search for satellite signals
automatically. This may take several seconds depending on the
location.
When GPS is fixed, the GPS signal icon (
the GPS status.
Note: Depending on your device model, it will also automatically scan and pair the
accessories (for heart rate monitor and cadence/speed sensor only) with the device.
You can also scan the accessories manually while using the device by tapping Main
menu > Settings > Sensors.

Connecting your device to the computer

1. Turn on the computer.
2. Turn on your device.
3. Connect the Micro-USB end of the USB cable to the back of your
device and the other end to a USB port on your computer.
4. Select the desired connection type from the pop-up message window:
• Connect to PC: Your device will be recognised as two external
mass-storage drives: Mio_system and Mio_data. You can use
Windows File Explorer to copy/move the files from the computer
to your device. A USB Connection screen appears to prevent you
from using your device.
DO NOT delete any files that are pre-installed on the device.
Deleting the files can cause the device to crash. Mio is not
responsible for product quality caused by file deletion.
• Charge only: You will be able to continue using your device with
the battery in charging mode via the computer.

Installing the device

) on the screen indicates
6

Mounting the device on your bike

The bike mount kit includes two types of rubber pads, allowing you to
attach the bike mount to your bike securely.
1. Select the rubber pad that best fits the handle bars on your bike and
then attach it using the two plastic straps.
2. Align the latch on the back of the device with the slot on the bike
mount, and then rotate the device clockwise to lock the device to the
bike mount.
You can choose to mount the device on the handlebar or on the stem.
See the following figure for the examples of mounting the device.