Table of Contents
Advertisement
Chapter 3. Configuration
Miscellaneous
Loopback Timeout
Sets the loopback timeout to D
15
DS2 Configuration
The MX2800 can individually frame each of the seven DS2 streams
in M12 (four T1s) or G.747 (three E1s) format. When set to M12
(4
T1.107. When set to G.747 (3
selected group are framed per CCITT G.747 into the DS3 stream.
The fourth T1/E1 port of the selected group is not available in this
mode. Any combination of M12 (4
allowed.
T1/E1 INTERFACE
The T1/E1 I
activate/deactivate individual T1s and E1s and to set their line
coding, length, loopback detection, circuit protection, and line ID
string. The T1/E1 code violation threshold is also configured
through this menu. Configuration selections are described in the
sections following Figure 3-4.
3-6
., 30
., 45
MIN
MIN
MIN
T1), the four T1s for the selected group are framed per ANSI
X
NTERFACE
MX2800 User Manual
, 1
ISABLED
MIN
. or 1
.
HR
E1), the first three T1/E1 ports of the
X
T1) and G.747 (3
X
menu (shown in Figure 3-4) allows you to
Figure 3-4. T1/E1 Interface Menu
., 5
., 10
.,
MIN
MIN
E1) is
X
61200290L1-1
Advertisement
Table of Contents
