EFX524i Elliptical Fitness Crosstrainer Assembly Guide
Rotate the side covers and slide them into place inside the
ramp cutout. Attach the side covers using four buttonhead
screws (B) and reinstall the four Phillips-head screws
removed in step 20. Tighten the fasteners using the
-inch hex key and a Phillips-head screwdriver.
Remove two Phillips-head screws from the upright support
bracket. Align the bracket cover with the mounting holes
and reinstall the screws. Wrench tighten.
Slide the handrail boot over the handrail mounts. Position
Handrail
detail not
the longer portion of the boot closest to the upright
shown.
support.
Push the cables behind the height adjuster threads. Make
sure that the cable connections are intact. Press the end
cap into the base tube.
Remove the packing material.
Clean the ramp with a soft cloth dampened in a diluted
solution of mild soap and water.
5