Programming A Speed Dial Key - Mitel 5215 Administration Manual

1. Press Superkey, and then press NO until PROGRAM PERSONAL KEYS? appears on
the display.
2. Press OK. SELECT A KEY appears on the display.
3. Press a Personal key. If the key has been programmed, the programming information
appears on the display. If the key has not been programmed, UNUSED KEY appears on
the display.

Programming a Speed Dial Key

To program a Speed Dial key:
1. Press Superkey, and then press >> until PROGRAM PERSONAL KEYS? appears on
the display.
2. Press OK. SELECT A KEY appears on the display.
3. Press the Personal key you wish to program. The associated programming information
appears on the display. If the key is not currently programmed, UNUSED KEY appears
on the display.
4. Do one of the following:
• If the selected key is currently programmed, press DELETE. ENTER NUMBER
appears on the display.
• If the selected key is not currently programmed, press ADDNEW. ENTER NUMBER
appears on the display.
5. Do one of the following:
• If you want to enter a name, press NAME.
• If you want to enter a SIP URL or an IP address, press URL.
6. Enter the destination information, and then press SAVE. KEY SAVED appears on the
display.
7. Press OK. PROGRAM MEMORY KEYS? appears on the display.
8. Do one of the following:
• To program additional Speed Dials, press OK. SELECT A KEY appears on the
display.
• To return to the default display, press Superkey.
9. For instructions on adding a label beside a programmed Personal key, refer to the
Installation Guide packaged with your phone.
Note: If the number you are calling requires an intermediate Long Distance Carrier number to
be dialed before the phone number, you can program a Speed Dial number for the Carrier.
After pressing the Speed Dial number for the carrier, wait for connection to the Carrier. When
connected, press the Speed Dial number for the party you are calling to send the DTMF
(touchtone signals) to the Carrier.
Note: If the Speed Dial number you want to program requires pauses (for example, if you
normally dial a main number, wait for a prompt, and then dial an extension) you can enter
program them into the Speed Dial by entering a comma to represent a one-second pause.
For example, to dial main number 592-2122 and then enter extension 111 after a 3-second
pause, program a Speed Dial number as follows: 5922122,,,111
- 31 -
Using Advanced Features