Using Advanced Features; Do Not Disturb; Enable/Disable Do Not Disturb; Call Logs - Mitel 5312 Administrator's Manual

Do Not Disturb

Do Not Disturb (DND) forwards all calls directly to your voice mailbox so that a ringing phone
will not disturb you. If Do Not Disturb is enabled and you do not have a voice mailbox set up,
callers hear a busy signal.
Note: When Do Not Disturb is enabled, *DND ON* alternates with the date on the phone's
display. If both Call Forward and Do Not Disturb are on, *DND ON* alternates with the
time on the display. Note: You can disable this display using the Display Control
section of the Feature Configuration page of the Web Configuration Tool.

Enable/Disable Do Not Disturb

1. Press (SUPERKEY), and then press >> until FEATURES? appears on the display.
2. Press OK, and then press ▼ until DO NOT DISTURB? appears.
3. Press OK. DO NOT DISTURB <current status> appears.
4. Press TURNON or TURNOFF to enable or disable Do Not Disturb. After the information
is saved, DO NOT DISTURB <new status> appears.
5. Do one of the following:
• To return to the main menu, press EXIT.
• To return to the default display, press
Note: To enable or disable Do Not Disturb using the Web Configuration Tool, access the
tool's Feature Configuration page (see Accessing the Web Configuration Tool on
page 7).

Call Logs

Call Logs keeps a record of your missed, answered and outgoing calls. The 5312/5324 IP
Phone logs the ten most recent missed, answered, and outgoing calls. The most recent call
appears at the top of each log.
Call Logs record party name, number, SIP URL or IP address, the call duration, and the time
and date of each call. When you have missed incoming calls, the number of calls missed
replaces the date on your phone's display. Note: You can disable this display using the
Display Control section of the Feature Configuration page of the Web Configuration Tool.
Note: Call log information is saved automatically every 4 hours. If you reset your phone in
that 4-hour interval, any call logs generated during that time will not be stored.

View a Call Log Entry

1. Press (SUPERKEY), and then press >> until CALL LOGS? appears.

Using Advanced Features

- 25 -
Using Advanced Features
(SUPERKEY).