Setting The Dmx Address; Control Panel Functions - Chauvet COLORado 3P User Manual

Setting the DMX address

Each fixture requires a "start address" from 1 to 244. A fixture requiring one or more channels for
control begins to read the data on the channel indicated by the start address. For example, a fixture
that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would
read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the
channels used do not overlap and note the start address selected for future reference. The
COLORado™ 3 uses 12 channels of DMX. If this is your first time using DMX, we recommend
reading the DMX Primer in the Appendix Section.

Control Panel Functions

All fixture functions and settings are accessible via the built in control panel interface.
SET
B
UTTON
SET
UP
DOWN
EXIT
COLORado™ 3 User Manual
UP DOWN EXIT
F
UNCTION
Enables the currently displayed menu or sets the currently selected value in to the
selected function
Navigates upwards through the menu list and increases the numeric value when in a
function
Navigates downwards through the menu list and decreases the numeric value when
in a function
Exits from the current menu or function
17
Operating Instructions
1/30/2012 10:56 AM