Accessing Your Router After Installation And Checking For New Firmware - NETGEAR DG834Gv3 Setup Manual

you can log into the router later to select a security option (see
Installation and Checking for New Firmware" on page
To ensure optimum performance of your high-speed wireless router, the
wireless adapter card for each computer in your network should support the
same technology as your router (see the online User Manual for more
information).
You are now connected to the Internet!
To set up your wireless network, see
Accessing Your Router After Installation and
Checking for New Firmware
The Smart Wizard only appears when you first install the router or when the router is in its factory
default state (for example, if you have reset the router to its factory default settings). To change the
settings after installing and configuring your router using the Smart Wizard, you can click the
desktop shortcut—a preconfigured shortcut
the router main menu.
After logging in, you can:
• Configure WPS.
• Specify wireless settings.
For advanced features not convered in this manual, see the link to the online User Manual on the
router's main menu.
1. The shortcut icon is installed on your desktop only when using the Smart Wizard installation method.
10
"Configuring Your Wireless Network" on page
1 Optionally, you can also open a browser window and log in to the router.
"Accessing Your Router After
10).
placed on your desktop at installation—to open
Installing Your Router Using the Smart Wizard
19.