Servicing The Battery - Gravely 927060-1028 Owner's/Operator's Manual

SERVICING THE BATTERY

NOTE: Unit comes equipped with a
maintenance-free battery that requires no
regular maintenance except cleaning
terminals.
WARNING: Battery posts, terminals
and related accessories contain lead
and lead compounds, chemicals
known to the State of California to
cause cancer and reproductive harm.
Wash hands after handling.
Battery Removal and Installation
(Figure 20)
Remove
NOTE: Tag and mark wires prior to
disconnecting.
1. Remove detent pin (item 2) and tip seat
(item 1) forward.
2. Disconnect operator presence switch
wires (item 3) and remove seat (item 1)
from seat retainer slots (item 4).
1
11
10
9
8
1. Seat
2. Detent Pin
3. Operator Presence
Switch Wires
4. Seat Retainer Slot
3. Disconnect negative (–) cable (item 9)
4. Remove battery hold down bracket
5. Remove battery (item 6) from unit.
Install
1. Install battery (item 6) on unit.
2. Install cross brace (item 7) and battery
3. Connect positive (+) cable (item 10) first,
4. Apply petroleum jelly or dielectric grease
5. Install seat (item 1), in seat retainer slots
6. Put seat (item 1) down and install detent
5. Battery Hold Down
Bracket
6. Battery
7. Cross Brace
8. Negative (–) Terminal
Figure 20
GB - 19
first then positive (+) cable (item 10).
(item 5) and cross brace (item 7).
hold down bracket (item 5).
than negative (–) cable (item 9).
to battery cable ends and terminals.
(item 4) and connect operator presence
switch wires (item 3).
pin (item 2).
9. Negative (–) Cable
10. Positive (+) Cable
11. Positive (+) Terminal
2
3
4
5
6
7
OE0028