Table of Contents
Advertisement
11.
Lift up the front of the system board, and then pull the system board forward, up, and out of the
chassis (2).
Figure 7-39
To install the system board, reverse the removal procedure.
NOTE:
When replacing the system board, you must also change the chassis serial number in the
BIOS.
CAUTION:
of the heat sink with an alcohol pad supplied in the spares kit. After the alcohol has evaporated, apply
thermal grease to the top of the processor from the syringe supplied in the spares kit.
CAUTION:
interfere with the rotation of the drive cage or power supply.
134 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Removing the system board
Before reinstalling the heat sink you must clean the top of the processor and the bottom
When reconnecting the cables it is important that they be positioned so they do not
Hide quick links:
Advertisement
Table of Contents
