Disconnect Bluetooth Accessory; Wlan Sign In; Sign In For Wlan; Change Wlan Sign In - Cisco 8961 User Manual

Disconnect Bluetooth Accessory

(For Cisco Unified IP Phone 9951 and 9971 only.)
1. Press the Applications button
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
3. Select a Bluetooth accessory and then press the Disconnect softkey.

WLAN Sign in

Before you can access the WLAN network, you must sign in. Your system administrator sets up your
phone for wifi connectivity. For information about enabling the WLAN Sign in on your phone and the
various WLAN security modes available on your phone, see your system administrator.

Sign in for WLAN

1. Press the Applications button
2. Select WLAN Sign in. (Use the Navigation pad and Select button to scroll and select.)
Press the Sign in softkey.

Change WLAN Sign in

1. Press the Applications button
2. Select WLAN Sign in. (Use the Navigation pad and Select button to scroll and select.)
3. Press the Select button and from the keypad, enter a user ID.
Use the softkey to delete what is in the User ID field. Use the keypad to enter a user ID.
4. Press the down arrow on the Navigation pad to enter a password.
5. Press the Select button and from the keypad, enter a password.
Press the Sign in softkey.

Running Applications

You can view the applications that are running on your phone, including those that are not under
Applications menu: for example, Directories.

View Running Applications

1. Press the Applications button
2. Select Running Applications. (Use the Navigation pad and Select button to scroll and select.)
56
.
.
.
.
OL-19963-01