Cisco 8961 Setup

For cisco unified communications manager 10.0 (sip)

Hide thumbs Also See for 8961:

Download this manual See also: Administration Manual, User Manual

Phone Setup

•

Connect Footstand

If your phone is placed on a table or desk, connect the footstand to the back of the phone.

Connect Footstand, page 1

Adjust Phone Display Viewing Angle, page 2

Adjust the Handset Rest, page 3

Secure the Phone with a Cable Lock, page 4

Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 10.0 (SIP)

Page 1: Phone Setup
Secure the Phone with a Cable Lock, page 4 Connect Footstand If your phone is placed on a table or desk, connect the footstand to the back of the phone. Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
Page 2 The following figure shows the display angle of the Cisco Unified IP Phone 9971. Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
Page 3 Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from the top of the rotated tab. Step 5 Return the handset to the handset rest. Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
Page 4 For keyed locks, turn the key 90 degrees in the clockwise direction and pull the key out of the lock. Note For combination locks, rotate the lock 90 degrees and then scramble the combination. Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 10.0 (SIP)

9951 9971