Connect The Multibase To A Bluetooth Device; Disconnect The Multibase From A Bluetooth Device; Change Your Connected Bluetooth Device; Configure A Headset On The Phone - Cisco 7800 Series User Manual

CISCO 7800 SERIES

Connect the Multibase to a Bluetooth Device

Cisco Headset 561 and 562 with Multibase can connect to Bluetooth devices such as a mobile phone or tablet.
The headset base appears on your call device as Cisco Headset followed by the last three digits on your
headset serial number. You can find your headset serial number in the lower right corner on the underside of
your base.
Procedure
Step 1
Press the Bluetooth button on the back of the base twice to start pairing.
Step 2 In your device's Settings menu, select your headset.
The Bluetooth LED lights white when pairing is successful.

Disconnect the Multibase from a Bluetooth Device

You can disconnect your Multibase from its paired Bluetooth call device.
Procedure
Step 1 Press the Bluetooth button on the back of the base once. The LED may take a moment to turn off.
Step 2
Press the Bluetooth button again to reconnect to the same call device.

Change Your Connected Bluetooth Device

The Multibase can only remember one Bluetooth device at a time. The headset base appears on your call
device as Cisco Headset followed by the last three digits on your headset serial number. You can find your
headset serial number in the lower right corner on the underside of your base.
Procedure
Step 1
Press and hold the Bluetooth button on the back of the base for four seconds to clear the old call device from
the base's memory.
Step 2
After the Bluetooth LED starts to slowly pulse, press the Bluetooth button twice to search for Bluetooth
devices.
Step 3
In the settings on your new Bluetooth device, select your headset.

Configure a Headset on the Phone

After you have connected the headset, you may have to configure it on your phone.
GoMomentum.com 70
USER GUIDE
888.538.3960