Speed Dial
Speed-dial features allow you to place a call by pressing a button or entering a code. Before you can
use speed-dial features on your phone, you must set up speed-dial on your User Options Web pages.
Depending on setup, your phone can support these speed-dial features:
• Speed-Dial Buttons—Allow you to quickly dial a phone number from one or more line buttons set
up for speed dialing.
If your system administrator has set up the Line Status feature, you can monitor the status of a
speed-dial line by using the line status indicators.
• Speed-Dial Codes—Allow you to dial a phone number from a code (sometimes referred to as
abbreviated dialing).
Related Topics
Speed Dial on the Web, page 97
•
Line Status Indicators, page 83
•
Place a Call with a Speed-Dial Button
Before you can use speed-dial buttons on your phone, you must set up speed dial on your User Options
Web pages.
To place a call, press a speed-dial button
Place a Call with a Speed-Dial Code
Before you can use speed-dial codes on your phone, you must set up the codes on your User Options
Web pages.
Use a Speed-Dial Code On-hook
Enter the speed-dial code and press the Speed Dial softkey.
Use a Speed-Dial Code Off-hook
1. Go off-hook and press the Speed Dial softkey.
2. Enter the speed-dial code and press the Speed Dial softkey again to complete the call.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 7.1(3) (SIP)
on the left side of your phone.
Calling Features
89