Table of Contents
Advertisement
SC510 Chassis Manual
Checking the Server's Air Flow
Checking the Air Flow
1.
Make sure there are no objects to obstruct airflow in and out of the server.
2.
Use only recommended server parts.
3.
Make sure no wires or foreign objects obstruct air flow through the chassis.
Pull all excess cabling out of the airflow path, or use shorter cables.
4.
The control panel LEDs inform you of system status. See "Chapter 3: System
Interface" for details on the LEDs and the control panel buttons.
In most cases, the chassis power supply and fan are pre-installed. If you need to
install fans, continue to the Systems Fan section of this chapter. If the chassis will be
installed into a rack, continue to the next chapter for rack installation instructions.
4-10
Advertisement
Table of Contents
