Table of Contents
Advertisement
Checking the Server's Air Flow
Checking the Air Flow
1.
Make sure there are no objects to obstruct airflow in and out of the server. If
necessary, route the cables through the cable rack.
2.
Do not operate the server without drives or drive trays in the drive bays.
3.
Use only recommended server parts.
4.
Make sure no wires or foreign objects obstruct air flow through the chassis.
Pull all excess cabling out of the airflow path or use shorter cables.
5.
Do not operate the server for extended periods of time without the air shroud
in the proper place.
Chapter 5: Chassis Setup and Maintenance
5-11
Advertisement
Table of Contents
