Setting Enlarging/Reducing; Enlarging/Reducing Using Preset Copy Ratios; Enlarging/Reducing Using Custom Copy Ratios - Canon LASERBASE MF3110 User Manual

Hide thumbs Also See for LASERBASE MF3110:
Table of Contents

Advertisement

Setting Enlarging/Reducing

You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.

Enlarging/Reducing Using Preset Copy Ratios

1
Press [Enlarge/Reduce].
2
Press [ (-)] or [ (+)] to select the copy ratio ➞ press [OK].
You can select from the following:
- 200% MAX.
- 141% A5 ➞ A4
- 100%
- 70% A4 ➞ A5
- 50% MIN.
NOTE
5
If the <PAPER SIZE GROUP> setting of <COPY SETTINGS> menu in the Menu is set to <INCH> or <AB>, the
preset copy ratios will be as follows:
INCH: 50%, 64%, 78%, 100%, 129% and 200%;
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141% and 200%.
Enlarging or reducing using preset copy ratio is not available with the 2 on 1 copy function.
To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display <DIRECT 100%> ratio ➞ press
[OK].
You can also return the ratio to 100% using a custom copy ratio. (See "Enlarging/Reducing Using Custom Copy
Ratios" below.)

Enlarging/Reducing Using Custom Copy Ratios

1
Press [Enlarge/Reduce] twice.
2
Use the numeric buttons to enter the copy ratio ➞ press [OK].
Z O O M
-
You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy ratio. To increase the copy
ratio, press [ (+)]. To decrease the copy ratio, press [ (-)].
NOTE
Enlarging or reducing using a custom copy ratio is not available with the 2 on 1 copy function.
To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display <DIRECT 100%> ratio ➞ press
[OK].
You can also return the ratio to 100% using a preset copy ratio. (See "Enlarging/Reducing Using Preset Copy
Ratios" above.)
5-2
5 0 - 2 0 0 %
8 0 %
+
8 0 %
A 4
T E X T / P H O T O
01

Advertisement

Table of Contents
loading

Table of Contents