Setting Enlarging/Reducing - Canon imageCLASS D320 Basic Manual

Setting Enlarging/Reducing

You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
1
Press Enlarge/Reduce.
PRESET RATIO
- 100%
Ex:
Use 4 (–) or e (+) to select the copy
2
ratio.
PRESET RATIO
78% LGL →LTR
-
Ex:
• You can select from the following:
- 200% MAX.
STMT → LTR
- 129%
- 100%
LGL → LTR
- 78%
- 64%
- 50% MIN.
Enlarging/Reducing Using Custom Copy Ratios
1
Press Enlarge/Reduce twice.
ZOOM 50-200%
- 100%
Ex:
2
Use the numeric keys to enter the copy
ratio.
ZOOM 50-200%
- 80%
Ex:
• You can enter the copy ratio from 50% to 200%,
selectable in 1% increments.
• Even after entering the copy ratio, you can use 4
(–) or e (+) to adjust the copy ratio. To increase
the copy ratio, press e (+). To decrease the copy
ratio, press 4 (–).
3
Press Set.
+
Ex:
+
3
Press Set.
+
Ex:
+
78%
TEXT
• If the PAPER SIZE GROUP of COPY
SETTINGS in the Additional Functions is
NOTE
set to A or AB, the preset copy ratios will
be as follows:
A: 50%, 70%, 100%, 141% and 200%;
AB: 50%, 70%, 81%, 86%, 100%, 115%,
141% and 200%.
• Enlarging or reducing using preset copy
ratio is not available with the 2 on 1 copy
function.
• To reset the copy ratio, press
Enlarge/Reduce several times to display
DIRECT 100% ratio, then press Set.
• If you want to reduce LTR to STMT, select
64%, and choose FREESIZE in the
Additional Functions. Then specify the
STMT size.
80%
TEXT
• Enlarging or reducing using custom copy
ratio is not available with the 2 on 1 copy
NOTE
function.
• To reset the copy ratio, press
Enlarge/Reduce several times to display
DIRECT 100% ratio, then press Set.
01
LTR
01
LTR
4
4-5