Introduction; Description; Contents Of Pack; Optional Extras - Baxi Ecogen 24/1.0 Installation & Servicing Instructions Manual

Facia
Fig. 1
Information Label
© Baxi Heating UK Ltd 2012

1.0 Introduction

1.1

Description

1. The Baxi Ecogen 24/1.0 is a fully automatic gas fired wall
mounted condensing heat only boiler which will produce up to
1kW of electricity for use by the householder. Any electricity
excess to requirements at the time of production will be fed
back into the national grid. It is room sealed and fan assisted.
2. The boiler is set to give a maximum output of :-
24 kW (Heat), 1kW (Electric)
3. The boiler is suitable for use only on fully pumped sealed
systems.
4. The boiler data badge gives details of the model, serial
number and Gas Council number and is situated on the rear
of the facia (Fig. 1).
5. The boiler model name and serial number are also shown
on the information label on the panel behind the facia. This is
for user reference.
6. Models are available for use on Natural Gas (G20) or
Propane Gas (G31).
7. The boiler is intended to be installed in residential /
commercial / light industrial E.M.C. environments on a
governed metered gas supply only.
8. On Commissioning the appliance, the Distribution Network
Operator (DNO) must be informed using the form provided.
9. The boiler must be installed with one of the purpose
designed flues such as the standard horizontal telescopic flue
kit, part no. 5118069 .
10. All systems must be thoroughly flushed and treated with
inhibitor (see section 6.1 & 2).
1.2

Contents of Pack

The pack contains:-
• Boiler
• Wall Plate
• Gas Service Cock
• Fixing Screws & Wall Plugs
• Template
• Literature Pack
1.3

Optional Extras

1. Flueing kits - see Section 8.0
2. Removable THINK Controller
3. Wall Cradle & 5 LED Receiver Kit
4. Outside Sensor
5. Cylinder Sensor
7