Accessory Side Shelves Installation Instructions; Optional Stone Inlay Installation Instructions - Empire Comfort Systems VFD10CC series Owner's Manual

ACCESSORY SIDE SHELVES INSTALLATION INSTRUCTIONS

1. Remove cast iron or stone inlay inserts from casting top and
carefully set them aside.
2. Remove cast iron top from stove and place upside down on a
iron top.
4. Place left and right side shelves in place shown in Figure 24.
7. Replace cast iron top on unit.

OPTIONAL STONE INLAY INSTALLATION INSTRUCTIONS

1. Remove left cast iron insert and right cast iron insert from casting
top.
Page 36
Figure 24
Figure 25
8. Attach side shelf supports one at a time, using (2) ¼-20 hex
9. Replace cast iron or stone inlay inserts into casting top.
NOTICE: Be sure to remove side shelf supports prior to removing
cast iron top to eliminate potential scratching or chipping to the
cast iron sides.
NOTICE: Due to inherent properties of the casting process,
-
shelves to the casting top. These shims are provided in the form
accessory side shelf angles upward, toward the ceiling, washer(s)
2. Insert left stone inlay and right stone inlay into casting top.
3. Installation of stone inlay is completed.
Figure 26
WASHER PLACEMENT
(OUTSIDE OF TOP
CASTING SIDE BOLT)
WASHER PLACEMENT
(CENTER SIDE OF BOLT)
BOTTOM VIEW
Figure 27
29560-0-0312