Brief Description of the Components
The Digital Fireplace Control (DFC) is an automatic gas ignition
sion for atmospheric applications.
case of failure.
The DFC is set up as a stand alone (AC powered system with
Diagram on page 23.
system components are proper and positive.
Verify that the static inlet pressure meets the manufacturer's rec-
ommended inlet pressure. If necessary adjust the line pressure
regulator.
nesses.
WARNING:
must be done in accordance with the individual component
instructions.
Replacement of components must be performed in accor-
dance with this instructions manual.
29560-0-0312
IP TROUBLESHOOTING
-
-
-
-
-
Page 25