10,000 Btu Millivolt Lighting Instructions - Empire Comfort Systems VFD10CC series Owner's Manual

10,000 BTU MILLIVOLT LIGHTING INSTRUCTIONS

FOR YOUR SAFETY READ BEFORE LIGHTING
WARNING:
B. BEFORE LIGHTING, smell all around the appliance area
WHAT TO DO IF YOU SMELL GAS
phone. Follow the gas supplier's instructions.
3. Set REMOTE/OFF/ON switch to
"OFF".
4. Turn off all electric power to the
Do not force.
6. Wait ten (10) minutes to clear out any gas.
Then smell for gas, including near
Follow "B" in the safety information
to the next step.
gas control. The pilot is located
side.
2. Set REMOTE/OFF/ON switch to "OFF."
29560-0-0312
LIGHTING INSTRUCTIONS
to "OFF".
TO TURN OFF GAS TO APPLIANCE
department.
to "PILOT".
the Piezo Ignitor Button until the pilot is lit. Continue to hold
lit. If it goes out, repeat steps 5 through 9.
supplier.
gas supplier.
11. Set REMOTE/OFF/ON switch to desired setting.
to "OFF". Do not force.
-
to "ON".
Page 15