Running The Showenvironment Command - Fujitsu SPARC Enterprise T1000 Service Manual

Example showing a fault that was detected by POST. These kinds of faults are
■
identified by the message deemed faulty and disabled and by a FRU name.
sc> showfaults -v
faulty and disabled
Example showing a fault that was detected by the PSH technology. These kinds of
■
faults are identified by the text Host detected fault and by a UUID.
sc> showfaults -v
ID Time
0 SEP 09 11:09:26
SUN4U-8000-2S
3.3.3

Running the showenvironment Command

The showenvironment command displays a snapshot of the server's
environmental status. This command displays system temperatures, hard disk drive
status, power supply and fan status, front panel LED status, voltage and current
sensors. The output uses a format similar to the Solaris OS command prtdiag (1m).
●
At the sc> prompt, type the showenvironment command.
The output differs according to your system's model and configuration. Example:
sc> showenvironment
=============== Environmental Status ===============
--------------------------------------------------------------------------------
System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------
Sensor Status
--------------------------------------------------------------------------------
MB/T_AMB OK
MB/CMP0/T_TCORE OK
MB/CMP0/T_BCORE OK
MB/IOB/T_CORE OK
--------------------------------------------------------
System Indicator Status:
--------------------------------------------------------
ID Time
1 OCT 13 12:47:27
MB/CMP0/CH0/R1/D0 Host detected fault, MSGID:
UUID: 7ee0e46b-ea64-6565-e684-e996963f7b86
Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard
28 -10
50 -10
51 -10
49 -10
FRU
MB/CMP0/CH0/R1/D0 MB/CMP0/CH0/R1/D0 deemed
FRU
-5 0
-5 0
-5 0
-5 0
Fault
Fault
45 50 55
85 90 95
85 90 95
95 100 105
Chapter 3 Server Diagnostics 3-17