If the fault is a host-detected fault (displays a UUID), continue to
■
example:
sc> showfaults -v
ID Time
0 SEP 09 11:09:26 MB/CMP0/CH0/R0/D0 Host detected fault
MSGID:
SUN4V-8000-DX UUID: f92e9fbe-735e-c218-cf87-9e1720a28004
If the fault resulted in the FRU being disabled, such as the following,
■
sc> showfaults -v
ID Time
1 OCT 13 12:47:27 MB/CMP0/CH0/R0/D0 MB/CMP0/CH0/R0/D0
deemed faulty and disabled
then run the enablecomponent command to enable the FRU:
sc> enablecomponent MB/CMP0/CH0/R0/D0
8. Perform the following steps to verify the repair:
a. Set the virtual keyswitch to diag so that POST will run in Service mode.
sc> setkeyswitch diag
5-22
SPARC Enterprise T1000 Server Service Manual • April 2007
FRU
FRU
Step
Fault
Fault
8. For