When Choosing A Place For The Stylus Scan; Energy Star Compliance; Symbols Used In The Manual - Epson Stylus Scan 2500 Setup Manual

Do not dismantle the ink cartridges or try to refill them. Doing so may damage the
print head.

When choosing a place for the Stylus Scan

Place the Stylus Scan on a flat, stable surface that extends beyond the base of the
machine in all directions. The Stylus Scan will not operate properly if it is tilted or
at an angle.
Avoid places subject to rapid changes in temperature and humidity. Also keep the
Stylus Scan away from direct sunlight, strong light, and heat sources.
Avoid places subject to shocks and vibrations.
Leave enough room around the Stylus Scan to allow for sufficient ventilation.
Place the Stylus Scan near a wall outlet where the power cord can be easily
unplugged.
monitors, printers, fax machines, and copiers in an effort to reduce air pollution caused
by power generation.
w

Symbols Used in the Manual

Warnings
c
must be followed carefully to avoid bodily injury.
Cautions
must be observed to avoid damage to your equipment.
Note:
contain important information and useful tips on the operation of your Stylus Scan.
6
E S
NERGY TAR Compliance
E S
As an NERGY
E
product meets the
E
The International
voluntary partnership with the computer and office equipment industry
to promote the introduction of energy-efficient personal computers,
TAR Partner, EPSON has determined that this
S
NERGY TAR guidelines for energy efficiency.
S
NERGY TAR Office Equipment Program is a

ENERGY STAR Compliance