System Requirements; For Pcs; For Macintosh Computers - Epson Stylus Scan 2500 Setup Manual

System Requirements

For PCs

To use your printer, you need Microsoft
drive and a shielded, twisted-pair parallel cable. If you want to connect your printer to
a USB port, you need a Windows 98 pre-installed PC equipped with a USB port; and
a shielded USB cable.
Your computer should also meet the following system requirements.
Minimum System Requirements
i486/25 MHz for Windows 95
i486/66 MHz for Windows 98
32 MB RAM
50 MB hard disk space for Windows 98,
and 95
VGA size, 16 bit color
Your computer dealer can help you update your system if it does not meet these
requirements.

For Macintosh computers

You can use this printer with the following Apple
need a shielded USB cable.
Supported computer models
iMac Series (for USB)
USB equipped Power Macintosh G3
Your Macintosh must meet the following system requirements.
Minimum System Requirements
System 8.1 + iMac update 1.0
7 MB of available memory
12 MB of available memory when
background printing is turned on.
Note:Note:
The amount of available memory varies according to the number and kind of
applications that are open. To see how much memory is available, choose
About This Computer from the Apple menu and refer to the memory size
(listed in kilobytes) under Largest Unused Block (1,024K=1 MB).
System Requirements
® ®
Windows 95, or Windows
Recommended System
Pentium or higher processor
32 MB RAM or more for
Windows 98 and 95
50 MB or more free disk space
for Windows 98, and 95
SVGA or better 24 bit color
®
Macintosh
Recommended System
System 8.5.1 or later
14 MB or more of available memory
23 MB of available memory when
background printing is turned on.
®
98; a CD-ROM
®
computers. You also
7