Page 1
Model No. WLEX1076.0 USER'S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE DO NOT CONTACT THE STORE;...
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise cycle before using your exercise cycle. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
BEFORE YOU BEGIN Congratulations for selecting the new WESLO ® model number and serial number before contacting PURSUIT 350 exercise cycle. Cycling is one of the us. The model number and the location of the serial most effective exercises for increasing cardiovascular number decal are shown on the front cover of this fitness, building endurance, and toning the body.
ASSEMBLY To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480. Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack- ing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench , Phillips screwdriver , and...
Page 6
3. Attach the Left and Right Upright Covers (14, 15) around the Frame (1) with three M4 x 25mm Round Head Screws (41) as shown. 4. Attach the Seat (12) to the Seat Post (5) with four M8 Split Washers (42) and four M8 Nylon Locknuts (10).
Page 7
6. While another person holds the Upright (13) near the Frame (1) as shown, connect the Extension Wire (23) to the Reed Switch Wire (39). Next, con- nect the Resistance Cable (19) to the Lower Cable (29) in the following way: •...
Page 8
8. While a second person holds the Console (16) near the Upright (13), connect the console wire to the Extension Wire (23). Then, insert the wires down- ward into the Upright. Attach the Console (16) to the Upright (13) with four M6 x 15mm Button Screws (46).
HOW TO OPERATE THE EXERCISE CYCLE HOW TO ADJUST THE SEAT POST FEATURES OF THE CONSOLE The easy-to-use console features seven displays that For effective exer- provide instant exercise feedback during your work- cise, the seat outs. The displays are described below: should be at the proper height.
Page 10
HOW TO USE THE CONSOLE Note: The console can show speed and dis- tance in either miles or kilometers. The letters Before using the console, make sure that batteries are “mph” or “km/h” will appear in the display to show installed (see assembly step 7 on page 7).
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise cycle reg- moment. Repeat until the console displays correct ularly. Replace any worn parts immediately. feedback. When the Reed Switch is correctly adjusted, reattach the left side shield, the upright covers, and To clean the exercise cycle, use a damp cloth and a the left pedal.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning time. During the first few minutes of exercise, your this or any exercise program, consult your body uses carbohydrate calories for energy.
Page 13
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...