Panel Layout; The Front Panel - TP-Link TD-W8960N User Manual
300mbps wireless n adsl2+ modem router
Hide thumbs
Also See for TD-W8960N:
- User manual (122 pages) ,
- Installation manual (24 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
TD-W8960N
1.3 Panel Layout
1.3.1 The Front Panel
The Router's LEDs are located on the front panel.
The Router's LEDs are located on the front panel (View from left to right).
LED Explanation:
Name
Status Indication
On
(Power)
Off
On
(ADSL)
Flash
Off
On
Flash
(Internet)
Off
On
(WLAN)
Flash
Off
On
Flash
(WPS)
Off
On
(LAN1-4)
Flash
Off
Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to
the Router
for more information about how to make Internet connection correctly. If you have
already made a right connection, please contact your
is available now.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 1-1
The modem router is powered on.
The modem router is off. Please ensure that the power adapter is
connected correctly.
ADSL line is synchronized and ready to use.
The ADSL negotiation is in progress.
ADSL synchronization fails. Please refer to
The network is available with a successful Internet connection.
There is data being transmitted or received via the Internet.
There is no successful Internet connection or the modem router is
operating in Bridge mode. Please refer to
Wireless is enabled but no data is being transmitted.
The modem router is sending or receiving data over the wireless
network.
Wireless function is disabled.
A wireless device has been successfully added to the network by
WPS function.
WPS handshaking is in process and will continue for about 2 minutes.
Please press the WPS button on other wireless devices that you want
to add to the network while the LED is flashing.
The WPS function is disabled or the wireless device fails to be added
to the network in 2 minutes after WPS function is enabled. Please
refer to
4.5.2.1 WPS Setup
There is a device connected to this LAN port.
The modem router is sending or receiving data over this LAN port.
There is no device connected to this LAN port.
Note 1
Note 2
for more information.
ISP to make sure
4
for troubleshooting.
for troubleshooting.
2.3 Connecting
if your Internet service
Advertisement
Table of Contents
