Upnp - TP-Link TD-W8960N User Manual

TD-W8960N
You can select the modulation type, phone line pair and the capability of Bitswap or SRA. After
you set them up, click Save/Apply to save the configurations.

4.4.13 UPnP

Choose "Advanced Setup""UPnP", you can Enable or Disable the UPnP (Universal Plug and
Play) protocol on the screen.
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
Select the checkbox and click Save/Apply to enable the UPnP function.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-58
Figure 4-59
51