TP-Link TD-W8960N User Manual page 50

TD-W8960N
4.4.8.1 Queue Config
Choose "Advanced Setup""Quality of Service""Queue Config", you can set up virtual
servers on the screen below.
Click the Add button in Figure 4-41, and you can configure the QoS queue entry on the next
screen as shown in Figure 4-42.
 Name: Set a name for the entry.
 Enable: Select Enable option to take this entry effect.
 Interface: Assigned a specific Wan Service for this QoS queue entry.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-41
Figure 4-42
42