Table of Contents
Advertisement
4.5.10
APM setting
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Restrore AC Power Loss
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Power On By PCIE
Power On By Ring
Power On By RTC
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Enabled]
Power On By PS/2 Mouse [Disabled]
[Disabled]
[Enabled]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
4-34
Advanced
[Last State]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Disables the PS/2 Keyboard from generating a wake event.
Enables the PS/2 Keyboard to generate a wake event.
Disables the PS/2 Mouse from generating a wake event.
Enables the PS/2 Mouse to generate a wake event.
Disables the PCIE devices from generating a wake event.
Enables the PCIE devices to generate a wake event.
Disables the Ring devices from generating a wake event.
Enables the Ring devices to generate a wake event.
Disables RTC from generating a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set
values.
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
Chapter 4: BIOS setup
Advertisement
Table of Contents
