Table of Contents
Advertisement
5.3.7
Setting the Boot array in the BIOS Setup Utility
You can set the boot priority sequence in the BIOS for your RAID arrays when
creating multi-RAID using the Intel
To set the boot array in the BIOS:
Set at least one of the arrays bootable to boot from the hard disk.
1.
Reboot the system and press <Del> to enter the BIOS setup utility during
POST.
Go to the Boot menu and select the boot option priority.
2.
3.
Use up/down arrow keys to select the boot priority and press <Enter>. See
section 4.7 Boot menu for details.
From the Exit menu, select Save Changes & Exit, then press <Enter>.
4.
When the confirmation window appears, select Yes, then press <Enter>.
5.
5-34
Rapid Storage Technology.
®
Chapter 5: RAID configuration
Advertisement
Table of Contents
