2.5
Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press <Enter> to display the
configuration options.
Main Advanced
Suspend Mode
ACPI 2.0 Support
ACPI APIC Support
APM Configuration
Hardware Monitor
2.5.1
Suspend Mode [S1 (POS) only]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend. Configuration options: [S1 (POS) Only] [S3 Only]
[Auto]
2.5.2
ACPI 2.0 Support [Disabled]
Allows you to add additional tabled as per ACPI 2.0 specifications. Configuration
options: [Disabled] [Enabled]
2.5.3
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set
to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
2.5.4
APM Configuration
APM Configuration
Resotre on AC Power Loss
Power Button Mode
Advanced Resume Event Controls
Power On By External Modems
Power On By PCIE Devices
Power On By PCI devices
Power On By RTC Alarm
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
2-28
BIOS SETUP UTILITY
Power
Boot
[S1 (POS) only]
[Disabled]
[Enabled]
[Power Off]
[On/Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Tools
Exit
Select the ACPI state
used for System
Suspend.
+-
F1
F10
ESC
Select the Duty
Cycle in Throttle
mode.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
Chapter 2: BIOS setup