Table of Contents
Advertisement
5.2.2
Adding or �iewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
�iew/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
From the Management Menu, select Configure > �iew/Add Configuration,
1.
and then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
The ARRAY SELECTION MENU displays the available drives connected to
2.
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press <Space>. When selected, the drive indicator changes from READY to
ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
The information of the selected hard disk drive displays at the bottom of the
screen.
Follow step 3 to 12 of section 5.2.1 Creating a RAID set: Using Easy
3.
Configuration to add a new RAID set.
5-12
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
View/Add to The Existing Configuration
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
View/Add Configuration - ARRAY SELECTION MENU
Port # 2 DISK
77247MB
A.10.09231523R
A.10.09231523R
PORT #
0
ONLIN A00-00
1
ONLIN A00-01
READY
2
READY
3
HDS728080PLA380
PF20A60A
Chapter 5: RAID configuration
Advertisement
Table of Contents
