Toyota Sienna 2000 Operating Manual page 95

1. Run the lap and shoulder belt through
or around the convertible seat following
the instructions provided
manufacturer and insert the tab into
the buckle taking care not to twist the
belt. Keep the lap portion of the belt
tight.
CAUTION
D
After inserting the tab, make sure
the tab and buckle are locked and
that the lap and shoulder portions
of the belt are not twisted.
D
Do not insert coins, clips, etc. in
the buckle as this may prevent you
from properly latching the tab and
buckle.
D
If the seat belt does not function
normally, it cannot
child from injury.
Toyota dealer immediately. Do not
use the seat until the seat belt is
by its
fixed.
00 SIENNA(U)
protect your
Contact your
2. Fully extend the shoulder belt to put it
in the lock mode. When the belt is
then retracted even slightly, it cannot
be extended.
To hold the convertible seat securely,
make sure the belt is in the lock mode
before letting the belt to retract.
95