Table of Contents
Advertisement
If the center panel does not contact with
your garage door opener transmitter:
D
Check to see if spacer is on correct
pin.
D
Attach another spacer to the top of
original spacer. Check operation. If re-
quired, continue add spacers until con-
tact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
176
00 SIENNA(U)
CAUTION
D
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the garage door
opener box closed while driving.
D
Keep the remained spacers away
from children.
The
auxiliary
box
and
garage
opener box (stored in the glove box)
are interchangeable.
Removing the cover—
Half open the cover. Pinch each hinge and
pull it out of its pivot one by one as
shown above.
Do not remove the cover forcibly.
door
Advertisement
Chapters
Table of Contents
