Toyota Sienna 2000 Operating Manual page 82

4. Compress the shoulder belt clip to
separate the right and left shoulder
belts.
82
00 SIENNA(U)
5. Pull down the seatback part of the
removable pad. Make sure the child's
shoulders are at or below the maxi-
mum shoulder height indicator label.
The removable pad is attached by Velcros.
CAUTION
If your child's shoulders are above
the maximum shoulder height indica-
tor label, do not use the built- in child
restraint. Your child should use the
adult lap and shoulder belts.
6. Press the removable pad against the
Velcros and install the pad to the
seatback. Make sure the belts go
through the slots in the pad.
CAUTION
If you have removed the removable
pad for cleaning etc., do not use the
built- in child restraint without
pad.
the