Toyota Sienna 2000 Operating Manual page 143

Table of Contents

Advertisement

DISC "
Compact disc auto changer only—
By using this button, you can select a
disc you wish to listen to.
Push either side of the button until the
number of the disc you want to listen to
appears on the display.
Dolbyr
B NR
If you are listening to a tape that was
recorded with Dolbyr B Noise Reduction,
push the button marked with the double- D
symbol. The double- D symbol will appear
on the display. Push the button again to
turn off Dolbyr B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used for
recording the tape.
: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. "DOLBY" and the
double D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
FM1·2
Push "FM1·2" to turn on the radio and
select the FM band. "FM1" or "FM2" will
appear on the display. This system allows
you to set twelve FM stations, two for
each button.
00 SIENNA(U)
If the audio system is off, you can turn
on the radio by pushing "FM1·2". Also,
push "FM1·2" to switch from cassette or
compact disc operation to radio operation.
PWR·VOL (Power and Volume)
Push "PWR·VOL" to turn the audio system
on and off. Turn "PWR·VOL" to adjust the
volume.
RAND (Random)
There are two random features—you can
either listen to the tracks on all the com-
pact discs in the magazine in random or-
der, or only listen to the tracks on a
specific compact disc in random order.
Random playing for the tracks on a disc:
Quickly
push
and
release
"
" will appear on the display. The
disc you are listening to will play in ran-
dom order. If you hear a beep, you held
the button too long, and the player will
play all the tracks in the magazine in
random order. To turn off the random fea-
ture, push this button again.
Compact disc auto changer only—
Random playing for all the tracks in the
magazine:
Push and hold "
beep. "
" will appear on the display
and the player will perform all the tracks
on all the discs in the magazine in ran-
dom order. To turn off the random feature,
push this button again.
RPT (Repeat)
Cassette Player
Push "
" while the track is playing.
"
" will appear on the display. When
the track ends, it will automatically be
rewound and replayed. This process will
"
".
be continued until you push the button
again to turn off the repeat feature.
There must be at least 3 seconds of blank
space between tracks in order for the re-
peat feature to work correctly.
" until you hear a
143

Advertisement

Table of Contents
loading

Table of Contents